Subaru Shift Plate WRX 2015-2019

$ 95.00

Availability: Ships in 24 hours
Product Code: 244320

California Residents: Prop 65 Warning

Free Shipping


The COBB Shift Plate for your 2015-2019 Subaru WRX is designed to reduce overall shift throw while maintaining an OEM-like feel. Two adjustment points allow for either 15% or 35% reductions in shift throw. Weighing in at 825g, the COBB Shift Plate maintains a moment of inertia comparable to the stock part which provides effortless gear changes. The slim design allows for the factory-installed splash guard and heat shields to remain installed for an OEM-level of protection.


Reduce overall shifter throw with the COBB Shift Plate for your 2015-2019 Subaru WRX.

Subaru Shift Plate WRX 2015-2019
  • 15% or 35% Reduction in Shift Throw
  • Moment of Inertia Similar to Stock
  • Retains OEM Splash Guards/Heat Shields
  • Zinc Plated Steel & 316 Stainless

Customer Photos

Subaru Shift Plate WRX 2015-2019 is rated 5.0 out of 5 by 10.
Rated 5 out of 5 by from A Fantastic Upgrade for Short-Shift FANS! Great value but the inner-most pin (one closest to the fulcrum point) will provide the greatest reduction in throw. The outermost pin would move farther..easy to tell...which means the reduction in throw would be the lesser of the two..I used the inner pin and with the STI short shifter Cobb's shift bearing my throws are less than 2 in....a fantastic product. Be warned as others have..the roll-pin is a challenge. Invest in a set of roll pin punches...5 bucks?'ll still have to hammer on it pretty hard....but I made zero progress with a standard punch and just succeeded in mangling the end of the roll pin and a little of the old shift plate.
Date published: 2019-06-04
Rated 5 out of 5 by from Must have on our shifter! The quality is amazing, you retain all shields, you have two options for throw reduction. Just overall incredible.
Date published: 2019-03-29
Rated 5 out of 5 by from Perfect for me I've had this shift plate installed for the past 3 days now. Prior to the plate I just had a Raceseng slammer (635g), Perrin shift stop, Perrin shift bushing, Whiteline positive shift kit, and Group N transmission mount. Adding the shift plate to the mix on the 35% reduction setting is a perfect combination of shortening the throw and it actually seems to have taken some additional slop out. I opted for this over the Boomba plate as I generally liked the OEM shift plate was, but wanted a shorter throw without reducing the height. With the Boomba shift plate the heat or protector shield or whatever it is can't be reinstalled so I didn't want to have an additional part laying around. Overall it feels great and like some others have commented, this is the way it should have come from the factory. Another win for Cobb.
Date published: 2019-05-05
Rated 5 out of 5 by from Confirmed fitment This also fits any 2010-2014 Subaru Legacy manual transmission. As well as the bushing and shift stop
Date published: 2019-03-28
Rated 5 out of 5 by from Crisp, short throws So i already have the STI short throw shifter from the factory in my WRX. When i was installing this I put the pin on the inside hole (15%) reduction. Glad i'm did, in combination with the STI shrort throw, felt like a 50% reduction! Feels great though, clean, crisp shifts that are the perfect length. I did this install in combination with the perrin shifter bushing. I will say, it's worth it, but holy moly that install. Took me about 6 hours. Couple problem areas. Getting the roll pin out of the old plate. If you have issues, take out the inner small first, then outer large. Second, lost the roll pins, they shot out when i hammered them out, try to avoid that. Third, getting the found roll pins into the new plate. Lastly, getting the shifter arm back on the bushing. They say you don't need to remove the C clip, but you really do in order to get it on well. All in all, took all day, but worth it.
Date published: 2019-05-08
Rated 5 out of 5 by from Shift Plate Bought the drivetrain package. Shift plate is weighted perfectly. Installed easily and reduced throw considerably. With the Shifter Stop and Shift bushing I now have the shifter that I would have built for myself. Smooth, Tight, Quick. Top Notch Cobb. Thank You for all your hard work.
Date published: 2019-04-10
Rated 5 out of 5 by from Cobb shift plate I was use the Boomba shift plate now I change to Cobb shift plate I like it not to heavy more like OEM but better so I buy 2 for my 2 WRX replace them both
Date published: 2019-05-05
Rated 5 out of 5 by from Don’t think twice, you need this!! Great product. Definitely shortens the throw to a perfect amount and smooths the shifting characteristics by having the added weight of the plate.
Date published: 2019-05-01
  • y_2019, m_7, d_15, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_244320, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cobb
  • bvseo_sdk, p_sdk,
  • CLOUD, method:getContent, 26.03ms