Subaru Shifter Stop WRX 2015-2019

$ 35.00

Availability: Ships in 24 hours
Product Code: 244600

California Residents: Prop 65 Warning

Free Shipping


The COBB Shifter Stop for 2015+ WRX MT is an injection molded fiberglass-reinforced nylon that allows for adjustment to achieve more precise shifting. With installation and adjustment taking mere minutes, the results are instant.


Reduce side-to-side slop of your shifter while in the 1-2 and 5-6 shifter gates. There is nearly a full inch of horizontal play to the shifter mechanism while in gear in the two outer gates (1-2 and 5-6) from the factory. This can lead to loss of feeling and confidence in gear selection. The COBB Shifter Stop allows for independent adjustment of the two gates to significantly reduce side to side slop.

Subaru Shifter Stop WRX 2015-2019
  • Fiberglass Reinforced Nylon
  • Allows for Independent Gate Adjustment
  • Debossed COBB Logo
  • Installs In Minutes

Customer Photos

Subaru Shifter Stop WRX 2015-2019 is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from No Brainer Installs in a snap. Had to remove the shifter bezel and adjust it once after the initial install cause I didn't like how I set it up the first time. Definitely makes the lateral shift movement crisper. I can shift faster and be more confident that I'm solidly in gear with the stop. I like that the replacement bolts are studs. They allow you to adjust the right side stop and lock it in. Then work on the left side stop without havin to worry about moving the right side out of place. Other stops don't have this small but useful design consideration. At $35 and 20 minutes of your's a no brainer.
Date published: 2019-07-02
Rated 5 out of 5 by from Shifter Stop High Quality Piece. No more slop. Nice consistent shifts. Did the Drivetrain Stage 1. This kit does it all. Transforms the loose slow sloppy shifter and gives you that feel you need when your throwing it around.
Date published: 2019-04-10
Rated 5 out of 5 by from Shifter stop Easy install. Swivel socket helps but not necessary. Didn't need 12mm socket like instructions say but I did need a deep 10mm.
Date published: 2019-05-26
  • y_2019, m_7, d_15, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_244600, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cobb
  • bvseo_sdk, p_sdk,
  • CLOUD, method:getContent, 48.85ms