Ford

Ford Carbon Fiber Intake System Focus RS 2016-2018, Focus ST 2013-2018

$ 650.00

Availability: Ships in 24 hours
Product Code: 793100

California Residents: Prop 65 Warning


Free Shipping
Maps Available

Description

The COBB Ford Focus ST/RS Carbon Fiber Intake is a great way to dress up your engine bay and increase performance. The gloss finish over a bold 3K Carbon Fiber Weave on the intake piping is coupled with a matching air box lid. Which is accented by a brushed aluminum COBB badge. Included is a pre-oiled, dual cone, filter to increase airflow and amplify that great turbo sound. This intake is a complete factory repalcement all the way to the turbo and is compatible with the original factory tune and all available COBB OTS maps.

Fitment verified for left-hand drive vehicles only.


Why?

Is there ever a bad time for Carbon Fiber parts?The COBB Ford Carbon Fiber Intake frees up airflow and adds a level of refinement under the hood of your Focus ST/RS without any compromises!


Features
Ford Carbon Fiber Intake System Focus RS 2016-2018, Focus ST 2013-2018
  • 3K Carbon Fiber Weave - Gloss Finish
  • Large 3" piping for ideal flow
  • Pre-Oiled and Re-usable Dual Cone Air Filter
  • 4-ply Black Silicone Couplers


Customer Photos

Reviews
Ford Carbon Fiber Intake System Focus RS 2016-2018, Focus ST 2013-2018 is rated 4.9 out of 5 by 7.
Rated 5 out of 5 by from Great quality and fitment! I had a Cobb intake on my car before this one, so it was quite easy to install. The biggest difference though, other than the carbon baller look, is how much more you can hear the turbo. I would say it is about 25% louder in cabin. Not sure if it is just the resonance of the carbon tubes, but I love the sound. Quality is Cobb. Never been let down by them. Still am not. The added touches of the SF Intake plaque is great.
Date published: 2018-03-20
Rated 4 out of 5 by from Looks great, sounds great, but there is some fitment issues witht eh 2016 focus st. I love the intake and the look is great. but the fitment on my 2016 focus st is a bit tight, i did get it to work, takes some muscle, but it will get in there. sorry no pics, or sound clip, its late and i will maybe do one later. It sounds great with flutter sound.
Date published: 2018-01-28
Rated 5 out of 5 by from Gorgeous intake! Initial impression: gorgeous Tools: 4 mm socket or adjustable wrench - stud for stock turbo side intake piece 7 mm nut driver or ratchet - intake cover and stock clamps 8 mm ratchet wrench or nut drivers - COBB clamps 10 mm nut driver or ratchet - nut on stud for stock turbo side piece and "RS" intake piece bolt Removal: Remove the engine cover. Remove bolt on "RS" intake piece, nut/stud from turbo side piece, and plastic intake cover grommet screw. None of these are reused. Remove the intake lid by loosening the four screws. Don't unscrew the screws completely until you have removed the lid from the engine bay. You will reuse these screws on the new intake cover. Remove the air filter. Unfasten the rubber flap over the induction tube for the intake. Loosen the stock clamps. I pulled the Air filter lower assembly out and rested it on the intake manifold (I was installing the COBB shift plate). Remove the rubber elbow piece. Unhook the tube connected the backside of the "RS" piece. Remove the "RS" piece by pulling it away from the turbo side piece. Remove the PCV valve connector on the back side of the turbo side pipe. Squeeze the bottom portion and pull it out. Remove the turbo side pipe. Slide it back and forth then pull up. Install prep: Install rubber grommet into the CFI tube, and then insert metal ring. Place the four screws on intake cover. Install necked down silicone coupler on the CFI tube. Ensure the clamp screw faces the passenger side of the engine bay. Install: I re-wrapped the CFI tube with the packing material while I placed it in the engine bay. Install the CFI tube on the turbo. Install the elbow on the CFI tube. W Reinstall the lower airbox if removed earlier. Connect the elbow to the lower airbox as it is reinstalled. Install the screw in the grommet of the CFI tube. Tighten down all of the clamps. Install air filter, with the included clamp (or not). Install the intake lid. Ensure it is properly aligned prior to tightening the screws. Limited driving review: The FORD CARBON FIBER INTAKE SYSTEM FOCUS RS 2016-201[U]8[/U] <--fixed that for you COBB... I'll just call it the CFI. The intake looks amazing. I'm not a fan of carbon fiber EVERYTHING, but I do like the look. Weight: The intake tube is featherweight, especially when compared to the stock tubes. The same goes for the intake lid. Overall the system saves around 3 lbs compared to the stock intake with a K&N filter. I would imagine very few people are looking into the CFI for the weight reduction anyway! Fit: Overall the fit was good. I didn't run into any issues with clearance or having to make adjustments. Finish: I expected it to have some minor flaws. But it really didn't. The packaging held up very well and I didn't see any scratches or chips in the tube or the cover. I haven't noticed any bunched up areas. The tube has seams, which are expected. Could they have been hidden better? Maybe, but I couldn't do better. The elbow coupler should have a notch to match up with the stock plastic elbow. If anything in the finish bothers me it is the hose clamps. They look cheap, and the screw is gold. All of the clamps are non-marring and don't have to hold boost, so I suppose they will do (for now). Sound: To me it sounds exactly like the Mishimoto intake on start up. Louder than stock, with more intake and turbo noise. When you get on the gas it sounds awesome. It gets the "whistle" from the resonator. I'll be ordering a sound suppression chamber. Performance: \No butt dyno. \ I'll wait until I have driven it for a few weeks to see if I "feel" like anything is better or worse. Here is the video for now. Cold start comparison, Stock with K&N versus COBB CFI [video=youtube;LobWJkFUgl8]https://youtu.be/LobWJkFUgl8[/video]
Date published: 2017-12-21
Rated 5 out of 5 by from Speechless!!!! bought to replace the Mishimoto intake I had. Cobb, another amazing product. The fit is spot on and super easy to install. The finish is absolutely gorgeous. Highly recommend this intake to everyone. Well worth the cost.
Date published: 2018-03-09
Rated 5 out of 5 by from Beautiful intake system Installation was a peice of cake. The carbon fiber is super sexy, it makes me want to pop the hood all the time
Date published: 2019-01-29
Rated 5 out of 5 by from Great looking Intake I purchased this Intake about a month ago but recieved it quickly. The intake not only helps my RS breathe better but also is a beautiful piece, I couldn't be happier with the end result and look!
Date published: 2019-05-08
  • y_2019, m_7, d_19, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_6
  • loc_en_US, sid_793100, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cobb
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 51.48ms
  • REVIEWS, PRODUCT

Questions