COBB Releases – January 2013

fleet

COBB is proud to announce performance and suspension part releases for January, 2013!

COBB BMW 1-Series Springs – The best first step to a better handling AND looking car! Click for more pictures and details. COBB BMW 1 & 3-Series Anti-Sway Bars – This perfectly balanced kit reduces body roll, sharpens turn-in response, and reduces understeer. Click for more pictures and details.
COBB BMW 3-Series Spring Kit – An easy way to enhance your stance and improve handling! Click for more pictures and details. COBB Ford Focus ST and MS3 Rear Motor Mount – Improve traction and reduce wheel hop while minimizing NVH with a unique bushing design. Click for more pictures and details.
COBB Nissan GT-R Sport Spring Kit – Improve handling and appearance while reducing coil slap. Click for more pictures and details. COBB Nissan GT-R Anti-Sway Bar Kit – The easiest way to minimize body roll, increase turn-in response, and balance your body rotation. Click for more pictures and details.
COBB Subaru 08+ Anti-Sway Bar Kit – The perfectly balanced kit reduces body roll and improves turn-in response! Click for more pictures and details. COBB Mitsubishi Evo X Oval Tip Exhaust – A long time favorite is back! Click for more pictures and details.


COMMENTS
Krasimir Dobrev on April 11, 2013 says:

Dear Sir,

I am looking for a Power kit for Ford Focus ST , mostly step 1 – ECU remaping.
Like 25-30 bhp power increase without to replace airfilter and or exhaust.

Did Comm enginering provides that ? And how I can get it since I live in Norway ?
Best regards

K. Dobrev

Reply
    Marshall Glasgow
    Marshall Glasgow on April 30, 2013 says:

    Our Stage 1 OTS map will net gains of 10-15whp and 30-40wtq with tuning alone – no other modifications are required. You can reference our for dyno evidence of those gains. – Marshall@COBB

    Reply
dickie wong on April 24, 2013 says:

I am interested in the newly released Accessport computer upgrade kit for my new Ford Focus ST, 2013. Please kindly advise the details such as price and method of installation.

Thanks.

Reply
    Marshall Glasgow
    Marshall Glasgow on April 30, 2013 says:

    The Ford Focus ST Accessport is available for purchase on our website for $449 USD + Shipping if necessary (we offer free ground shipping within the US). Installation is very quick and takes less than 5 minutes. Email support@cobbtuning.com if you have any other questions! – Marshall@COBB

    Reply
Frank Schwager on May 25, 2013 says:

Is Cobb developing a cat back system for the Ford Focus ST?….if so…when will it be released?

Reply
    Marshall Glasgow
    Marshall Glasgow on June 3, 2013 says:

    Frank, sorry I missed this! We have released our Focus ST catback, you can find it on our website at the following link.

    – Marshall@COBB

    Reply
Ali on June 12, 2013 says:

Hi,

I have a 2012 GTR that has 3300 miles. I would
Like to get a increase in HP with keeping stock
Turbos. What amount of HP is safe to increase
On the stock turbos? How would it be possible? Thank You.

Ali.

Reply
    Marshall Glasgow
    Marshall Glasgow on June 19, 2013 says:

    Ali, the stock turbochargers will peak at about 575-620whp depending on the fuel used. To achieve those numbers you would need an upgraded fuel system and a custom tune along with other Stage 2 supporting modifications. – Marshall@COBB

    Reply
Leslie on July 9, 2013 says:

Hi there, i have a 2011 GTR and would like to delimit the 180KM and pretty much keep the car bone stock, which accessport will you recommend? Thanks!

Reply
    Marshall Glasgow
    Marshall Glasgow on August 15, 2013 says:

    You would be able to accomplish that goal using either a V2 or V3 NIS-005 Accessport, all found . – Marshall@COBB

    Reply
Brian Burns on September 8, 2013 says:

I HAVE 2008 IMPREZA WRX, I RECENTLY INSTALLED “TGV” ELIMINATION MANIFOLD,ALONG WITH UPDATED EXHAUST & COLD AIR KIT. PROBLEM IS CK. ENGINE LITE COMES ON SETTING CODES ,PO20006,PO2007.COMPUTER STILL TRYING TO OPERATE PARTS NO LONGER THERE. I HAVE ONE OF YOUR ACCESS PORT TUNERS THAT CAME PRELOADED WITH A FEW GENERAL MAPS. MY QUESTION WOULD BE, IS A MAP AVAILABLE THAT WOULD SOLVE THIS PROBLEM OR ANY OTHER ADVISE WOULD BE HELPFUL THANK YOU.

Reply
    Marshall
    Marshall on November 20, 2013 says:

    Brian, we do not have an OTS map that will be compatible with the TGVs being deleted. You will either need to have your car custom tuned by one of our Protuners or tweak one of our OTS maps using our Accesstuner Race software.

    Marshall@COBB

    Reply
Mike gibbs on March 8, 2014 says:

Hi guys,
Are you planning to introduce tuning kit for 2015 wrx sti, as it surely needs more torque at lower rpms and can do with a little more hp, espacially with the weight gain.

Reply
    Marshall
    Marshall on March 10, 2014 says:

    It is definitely something we are planning to offer!

    Marshall@COBB

    Reply
Richard on March 11, 2014 says:

Do you have an update on a release for the BMW F10 535i?

Reply
    Marshall
    Marshall on March 17, 2014 says:

    Richard, the F-chassis BMWs are not something we are currently working on. Sorry for the bad news! – Marshall@COBB

    Reply
Dami on March 25, 2014 says:

Any news on Accessport for the BMW F30’s?

Reply
    Marshall
    Marshall on March 28, 2014 says:

    F30 support is not something we are currently working on. Sorry for the bad news!

    Marshall@COBB

    Reply
jim marsh on April 2, 2014 says:

My 2015 Forester XT Limited Automatic just arrived at the dealer. Will take delivery on Monday whats available for this car?

Reply
    Marshall
    Marshall on April 16, 2014 says:

    Unfortunately we do not currently have any products available for the 2015 Forester XT. It is definitely a vehicle we would like to support in the future however the new WRX and STI are currently taking priority.

    Marshall@COBB

    Reply
David Brown on May 14, 2014 says:

Hi I recently bought a 2004 RX8. It has what I believe to be a V2 access port which I can’t get to work. Would I benefit from your upgrade plan and are you still offering maps for this car. The previous owner has been no help. I’m thinking fresh start. I know the engine has recently been rebuilt 4K ago and been street ported. I am new to engine mapping so please consider that in your response.
Many thanks
David

Reply
    Marshall
    Marshall on May 22, 2014 says:

    Hey David, we do not offer a V3 Accessport for the Mazda RX8 so you wouldn’t be able to take advantage of the trade-in program. Alternatively, you can definitely send the non-functioning Accessport to us to be repaired and updated if you’d like! You can contact our CSR department at 1-866-922-3059 or support@cobbtuning.com to get a repair ticket started.

    Marshall@COBB

    Reply